SOLVOL
CHARACTERISTICS AND FEATURES: When a mild fluid is needed
to flush out the arterial system, Frigid recommends Solvol pre-injection
fluid. A 6 index fluid, Solvol is excellent for clearing the body to allow
for better distribution and penetration of an arterial fluid. Special ingredients
help prevent water-logging sometimes associated with pre-injections, and
also help to remove discoloration. In addition to its use as a pre-injection,
Solvol is useful as a bleaching agent. It penetrates readily into the affected
tissue and remarkably reduces the objectionable discoloration. Because
of its low formaldehyde content and proper modifiers, Solvol is an excellent
fluid for embalming infants. The delicate tissue receives adequate preservative
in an overall mild formulation. If death is due to contagious disease or
has involved renal failure, a higher index fluid would be advisable.
HOW TO USE THE FLUID: As a pre-injection use Solvol at
a dilution of 6 to 8 ounces per gallon. Use 1/2 to 1 gallon of diluted
fluid to clear the body, and then continue with arterial fluid injection.
As a bleach Solvol may be injected hypodermically into the affected area
or may be used in a pack over the area. Packs should be covered with plastic
to improve penetration into the tissue and to control fumes. To embalm
infants use 8 to 10 ounces per gallon. The concentration will vary with
age, the condition of the body, and the cause of death. Initial injection
down a leg will help to determine the proper concentration, and will also
help determine if additional dye would be of benefit.